In the early 90s I wrote AutoLISP code for AutoCAD 9/10 that enabled a
CSV → template → parametric drawing workflow.
You could define components in spreadsheets, feed them through templates, and generate complete technical drawings automatically.
I've never seen anyone else use this approach. Now I've built an interpreter
in Rust/WASM so it can run in the browser - partly nostalgia, partly
preservation before this knowledge disappears entirely.
The lisp/ folder contains some LSP files from that era, others i recreated from memory.
What kind of drawings were you generating? Electrical schematics, mechanical parts, architecture?
We also have some playground, to toy around with LISP and some function generator, to demonstrate Lisp usage for math...
We were on the same page. I also built something similar for a Conveyor company here in Canada in the early 90's. We parameterized all their tech drawings (or at least the initial versions) from their component libraries. Was a great project. Not sure how long they used it, they eventually acquired the resources to support it internally (I was an independent AutoLISP contractor). Good times back then. I haven't done AutoLISP in years now but great to see it's still around.
Also, the page you link to in the original post is in German; it might be nice to have an English page for the mostly English speaking audience here on HN
I had to accomplish pretty much the same exact task circa 1999, but in Aldus Pagemaker using Postscript.
My first job out of college was a 6 month contact at a fairly small industrial control manufacturer that had been purchased by a larger conglomerate. All of their engineering documentation needed to be converted to the new company’s format.
The old company had devised a scheme whereby a wire harness could be completely described by the part number, which encoded the wire size, color, length, and termination. The new company wanted a detail drawing for each wire, with thousands in the database.
I made a library of reusable glyphs that could be stored in Pagemaker layers, and connected with postscript generated lines, and a script to iterate through the part number database and generate drawings.
Super interesting. Thanks. AutoLisp was both a pain and underrated. But, it was perfect for this sort of stuff. Much easier than generating the dxf files directly, say using postscript ;-). I love the modern recreations and UI.
Thanks! You nailed it - AutoLISP was the right abstraction. Direct DXF/PostScript meant entity tables and coordinate gymnastics. (command "LINE" p1 p2) just did the thing.
What's running here: real WASM interpreter executing AutoLISP, not a slideshow. SVG native, DXF export (AC1009), all text editable, JSON data feed instead of CSV. My brother could open this page and start working the same workflow we did in '91 - better feed, better output.
And Rust is a surprisingly natural fit - Lisp's explicit stack discipline maps cleanly onto ownership. What Rust enforces, Lisp already wants.
related: "In Version 2.5, AutoLISP allowed access to the DWG database. AutoLISP was based on XLISP, a public domain version of LISP written by David Betz. Betz later complained that Autodesk had failed to acknowledge the source, which the company later did." (https://www.shapr3d.com/history-of-cad/autodesk-and-autocad)
Thanks for the link! I didn't know about the XLISP controversy.
My interpreter doesn't aim for full compatibility - just enough to run
the schematic generation workflow from 1991. The core is: defun, setq,
car/cdr, recursion, and the (command ...) interface to draw entities.
The interesting part was how templates could trigger other templates -
inserting a contactor (Schütz) would automatically generate its coil
in the control circuit. Code writing code, classic LISP.
I remember using Betz's stuff on my Atari ST in the 80s (and then other stuff he did decades later on the Parallax Propeller chip, where he is an active community member). XLISP, advsys, and his scheme dialect, too.
I always wondered if he got compensated for the stuff he did that then got used in AutoCAD.
sure it does, but Lisp is special, and for those times it was very special.
I did not want to show how it is done nowadays, but how we had done it 33 yrs ago...
And now there is the emulator as the web-page, this is what i wanted to share (everything works as wasm in the browser)...
In the early 90s I wrote AutoLISP code for AutoCAD 9/10 that enabled a CSV → template → parametric drawing workflow. You could define components in spreadsheets, feed them through templates, and generate complete technical drawings automatically.
I've never seen anyone else use this approach. Now I've built an interpreter in Rust/WASM so it can run in the browser - partly nostalgia, partly preservation before this knowledge disappears entirely.
The lisp/ folder contains some LSP files from that era, others i recreated from memory.
Repo: https://github.com/holg/acadlisp/
What kind of drawings were you generating? Electrical schematics, mechanical parts, architecture? We also have some playground, to toy around with LISP and some function generator, to demonstrate Lisp usage for math...
We were on the same page. I also built something similar for a Conveyor company here in Canada in the early 90's. We parameterized all their tech drawings (or at least the initial versions) from their component libraries. Was a great project. Not sure how long they used it, they eventually acquired the resources to support it internally (I was an independent AutoLISP contractor). Good times back then. I haven't done AutoLISP in years now but great to see it's still around.
I get a 404 for that repo; is it private?
Also, the page you link to in the original post is in German; it might be nice to have an English page for the mostly English speaking audience here on HN
What a repo. Anyways, tragic that Rust proponents apparently tried to assassinate a Rust critic, Rene Rebe.
Murderous, vile, wretched Rust proponents will censor, downplay and distract from this.
fixed it, thx for the notice
I have a lot of interest in this space for infrastructure design. Thanks for sharing.
I had to accomplish pretty much the same exact task circa 1999, but in Aldus Pagemaker using Postscript.
My first job out of college was a 6 month contact at a fairly small industrial control manufacturer that had been purchased by a larger conglomerate. All of their engineering documentation needed to be converted to the new company’s format.
The old company had devised a scheme whereby a wire harness could be completely described by the part number, which encoded the wire size, color, length, and termination. The new company wanted a detail drawing for each wire, with thousands in the database.
I made a library of reusable glyphs that could be stored in Pagemaker layers, and connected with postscript generated lines, and a script to iterate through the part number database and generate drawings.
Super interesting. Thanks. AutoLisp was both a pain and underrated. But, it was perfect for this sort of stuff. Much easier than generating the dxf files directly, say using postscript ;-). I love the modern recreations and UI.
Thanks! You nailed it - AutoLISP was the right abstraction. Direct DXF/PostScript meant entity tables and coordinate gymnastics. (command "LINE" p1 p2) just did the thing. What's running here: real WASM interpreter executing AutoLISP, not a slideshow. SVG native, DXF export (AC1009), all text editable, JSON data feed instead of CSV. My brother could open this page and start working the same workflow we did in '91 - better feed, better output. And Rust is a surprisingly natural fit - Lisp's explicit stack discipline maps cleanly onto ownership. What Rust enforces, Lisp already wants.
related: "In Version 2.5, AutoLISP allowed access to the DWG database. AutoLISP was based on XLISP, a public domain version of LISP written by David Betz. Betz later complained that Autodesk had failed to acknowledge the source, which the company later did." (https://www.shapr3d.com/history-of-cad/autodesk-and-autocad)
https://github.com/dbetz/xlisp
Thanks for the link! I didn't know about the XLISP controversy.
My interpreter doesn't aim for full compatibility - just enough to run the schematic generation workflow from 1991. The core is: defun, setq, car/cdr, recursion, and the (command ...) interface to draw entities.
The interesting part was how templates could trigger other templates - inserting a contactor (Schütz) would automatically generate its coil in the control circuit. Code writing code, classic LISP.
I remember using Betz's stuff on my Atari ST in the 80s (and then other stuff he did decades later on the Parallax Propeller chip, where he is an active community member). XLISP, advsys, and his scheme dialect, too.
I always wondered if he got compensated for the stuff he did that then got used in AutoCAD.
Sounds like no
AutoCad nowadays uses .NET as well, and thus any CLR enabled language, with a MSIL backend.
https://help.autodesk.com/view/OARX/2024/ENU/?guid=GUID-390A...
sure it does, but Lisp is special, and for those times it was very special. I did not want to show how it is done nowadays, but how we had done it 33 yrs ago... And now there is the emulator as the web-page, this is what i wanted to share (everything works as wasm in the browser)...