I wonder if this can help with the extremely irritating bug (intentional?) on the X270 where if you give it a third party 9-cell battery, it will raise CPU_PROCHOT all the damn time, and my processor would drop to below 1Ghz clock speeds.
Back when I used to have an X270 I had a shell script that ran on boot which poked a register to disable thermal throttling handling. Not at all ideal, but it made the machine usable in the absence of official Lenovo batteries which they stopped manufacturing pretty damn quickly.
Possibly. Usually this is handled by the embedded controller, and not sure if that was reversed or not. You may be able to tristate the GPIO line that tells the CPU that a pin means PROCHOT, which would allow you to ignore the ECs attempts to do this.
You can sometimes find the serial lines if you are careful. Otherwise you can use the flashrom to store the output, and read it back out after each failure. It is much easier to just poke around and find the serial if you can, either from schematics (it seems the author has these) or by hand with a lot of patience or board scrying.
I wonder if this can help with the extremely irritating bug (intentional?) on the X270 where if you give it a third party 9-cell battery, it will raise CPU_PROCHOT all the damn time, and my processor would drop to below 1Ghz clock speeds.
Back when I used to have an X270 I had a shell script that ran on boot which poked a register to disable thermal throttling handling. Not at all ideal, but it made the machine usable in the absence of official Lenovo batteries which they stopped manufacturing pretty damn quickly.
Possibly. Usually this is handled by the embedded controller, and not sure if that was reversed or not. You may be able to tristate the GPIO line that tells the CPU that a pin means PROCHOT, which would allow you to ignore the ECs attempts to do this.
Do you think it could also be due to an ACPI table?
Its possible. I know from the BIOS revision changelogs that the T470 did get a patch to fix this, but the X270 never did.
How did OP debug this without a serial port?
I’ve messed around with porting coreboot on two desktop platforms but always had the benefit of a HW serial port…
You can sometimes find the serial lines if you are careful. Otherwise you can use the flashrom to store the output, and read it back out after each failure. It is much easier to just poke around and find the serial if you can, either from schematics (it seems the author has these) or by hand with a lot of patience or board scrying.
Atom feed is malformed :(
This is absurdly trans-coded.
Ah, todsacerdoti. ;)
What I would give for a wife that would enjoy tinkering with me.
Seek and thou shalt find. Just don’t be too pushy on the romantic side of things.
Too late for me then I suppose, I'm married with two kids.
Was AI Used?
Does it matter?