Don't blame the ISA - blame the silicon implementations AND the software with no architecture-specific optimisations.
RISC-V will get there, eventually.
I remember that ARM started as a speed demon with conscious power consumption, then was surpassed by x86s and PPCs on desktops and moved to embedded, where it shone by being very frugal with power, only to now be leaving the embedded space with implementations optimised for speed more than power.
Also the bit manipulation extension wasn't part of the core. So things like bit rotation is slow for no good reason, if you want portable code. Why? Who knows.
> Also the bit manipulation extension wasn't part of the core.
This is primarily because core is primarily a teaching ISA. One of the best parts about RiscV is that you can teach a freshman level architecture class or a senior level chip building project with an ISA that is actually used. Anything powerful to run (a non built from source manually) linux will support a profile that bundles all the commonly needed instructions to be fast.
Bit manipulation instructions are part and parcel of any curriculum that teaches CPU architecture. They are the basic building blocks for many more complex instructions.
I can see quite a few items on that list that imnsho should have been included in the core and for the life of me I can't see the rationale behind leaving them out. Even the most basic 8 bit CPU had various shifts and rolls baked in.
32-bit barrel shifters consume significant area and RISC-V was developed to support resource constrained low cost embedded hardware in a minimal ISA implementation.
This is the reason behind the profiles like RVA23 which include bitmanip, vector and a large number of other extensions. Real chips coming very soon will all be RVA23.
> One of the best parts about RiscV is that you can teach a freshman level architecture class or a senior level chip building project with an ISA that is actually used.
Same could be said of MIPS.
My understanding is the RISC-V raison d'etre is rather avoidance of patented/copywritten designs.
the avoidance of patent/copyright is critical for (legally) having students design their own chips. MIPS was pretty good (and widely used) for teaching assembly, but pretty bad for teaching a class where students design chips
Not trolling: I legitimately don't see why this is assumed to be true. It is one of those things that is true only once it has been achieved. Otherwise we would be able to create super high performance Sparc or SuperH processors, and we don't.
As you note, Arm once was fast, then slow, then fast. RISC-V has never actually been fast. It has enabled surprisingly good implementations by small numbers of people, but competing at the high end (mobile, desktop or server) it is not.
RISC-V doesn't have the pitfalls of Sparc (register windows, branch delay slots), largely because we learned from that. It's in fact a very "boring" architecture. There's no one that expects it'll be hard to optimize for. There are at least 2 designs that have taped out in small runs and have high end performance.
RISC-V does not have the pitfalls of experimental ISAs from 45 years ago, but it has other pitfalls that have not existed in almost any ISA since the first vacuum-tube computers, like the lack of means for integer overflow detection and the lack of indexed addressing.
Especially the lack of integer overflow detection is a choice of great stupidity, for which there exists no excuse.
Detecting integer overflow in hardware is extremely cheap, its cost is absolutely negligible. On the other hand, detecting integer overflow in software is extremely expensive, increasing both the program size and the execution time considerably, because each arithmetic operation must be replaced by multiple operations.
Because of the unacceptable cost, normal RISC-V programs choose to ignore the risk of overflows, which makes them unreliable.
The highest performance implementations of RISC-V from previous years were forced to introduce custom extensions for indexed addressing, but those used inefficient encodings, because something like indexed addressing must be in the base ISA, not in an extension.
> On the other hand, detecting integer overflow in software is extremely expensive, increasing both the program size and the execution time considerably,
Most languages don't care about integer overflow. Your typical C program will happily wrap around.
If I really want to detect overflow, I can do this:
add t0, a0, a1
blt t0, a0, overflow
Which is one more instruction, which is not great, not terrible.
I have no idea or practical experience with anything this low-level, so idk how much following matters, it's just someone from the crowd offering unvarnished impressions:
It's easy to believe you're replying to something that has an element of hyperbole.
It's hard to believe "just do 2x as many instructions" and "ehhh who cares [i.e. your typical C program doesn't check for overflow]", coupled to a seemingly self-conscious repetition of a quip from the television series Chernobyl that is meant to reference sticking your head in the sand, retire the issue from discussion.
As a counterexample, I point to another relatively boring RISC, PA-RISC. It took off not (just) because the architecture was straightforward, but because HP poured cash into making it quick, and PA-RISC continued to be a very competitive architecture until the mass insanity of Itanic arrived. I don't see RISC-V vendors making that level of investment, either because they won't (selling to cheap markets) or can't (no capacity or funding), and a cynical take would say they hide them behind NDAs so no one can look behind the curtain.
I know this is a very negative take. I don't try to hide my pro-Power ISA bias, but that doesn't mean I wouldn't like another choice. So far, however, I've been repeatedly disappointed by RISC-V. It's always "five or six years" from getting there.
> RISC-V doesn't have the pitfalls of Sparc (register windows, branch delay slots),
You're saying ISA design does have implementation performance implications then? ;)
> There's no one that expects it'll be hard to optimize for
[Raises hand]
> There are at least 2 designs that have taped out in small runs and have high end performance.
Are these public?
Edit: I should add, I'm well aware of the cultural mismatch between HN and the semi industry, and have been caught in it more than a few times, but I also know the semi industry well enough to not trust anything they say. (Everything from well meaning but optimistic through to outright malicious depending on the company).
The 2 designs I'm thinking of are (tiresomely) under NDA, although I'm sure others will be able to say what they are. Last November I had a sample of one of them in my hand and played with the silicon at their labs, running a bunch of AI workloads. They didn't let me take notes or photographs.
> There's no one that expects it'll be hard to optimize for
No one who is an expert in the field, and we (at Red Hat) talk to them routinely.
I don't think anybody suggests Oracle couldn't make faster SPARC processors, it's just that development of SPARC ended almost 10 years ago. At the time SPARC was abandoned, it was very competitive.
Marcin is working with us on RISC-V enablement for Fedora and RHEL, he's well aware of the problem with current implementations. We're hopeful that this'll be pretty much resolved by the end of the year.
There's the ARM video from LowSpecGamer, where they talk about how they forgot to connect power to the chip, and it was still executing code anyway. According to Steve Furber, the chip was accidentally being powered from the protection diodes alone. So ARM was incredibly power efficient from the very beginning.
> AND the software with no architecture-specific optimisations
The optimizations that'd be applied to ARM and MIPS would be equally applicable to RISC-V. I do not believe this is a lack of software optimization issue.
We are well past the days where hand written assembly gives much benefit, and modern compilers like gcc and llvm do nearly identical work right up until it comes to instruction emissions (including determining where SIMD instructions could be placed).
Unless these chips have very very weird performance characteristics (like the weirdness around x86's lea instruction being used for arithmetic) there's just not going to be a lot of missed heuristics.
One thing compilers still struggle with is exploiting weird microarchitectural quirks or timing behaviors that aren't obvious from the ISA spec, especially with memory, cache and pipeline tuning. If a new RISC-V core doesn't expose the same prefetching tricks or has odd branch prediction you won't get parity just by porting the same backend. If you want peak numbers sometimes you do still need to tune libraries or even sprinkle in a bit of inline asm despite all the "let the compiler handle it" dogma.
Some applications may target a generic x86 architecture without any impact on performance.
However, other applications which must do cryptographic operations, audio/video processing, scientific/technical/engineering computing, etc. may have wildly different performances when compiled for different x86-64 ISA versions, for which dedicated assembly-language functions exist.
> Don't blame the ISA - blame the silicon implementations
That's true, but tautological.
The issue is that the RISC-V core is the easy part of the problem, and nobody seems to even be able to generate a chip that gets that right without weirdness and quirks.
The more fundamental technical problem is that things like the cache organization and DDR interface and PCI interface and ... cannot just be synthesized. They require analog/RF VLSI designers doing things like clock forwarding and signal integrity analysis. If you get them wrong, your performance tanks, and, so far, everybody has gotten them wrong in various ways.
The business problem is the fact that everybody wants to be the "performance" RISC-V vendor, but nobody wants to be the "embedded" RISC-V vendor. This is a problem because practically anybody who is willing to cough up for a "performance" processor is almost completely insensitive to any cost premium that ARM demands. The embedded space is hugely sensitive to cost, but nobody is willing to step into it because that requires that you do icky ecosystem things like marketing, software, debugging tools, inventory distribution, etc.
This leads to the US business problem which is the fact that everybody wants to be an IP vendor and nobody wants to ship a damn chip. Consequently, if I want actual RISC-V hardware, I'm stuck dealing with Chinese vendors of various levels of dodginess.
A lot of times the path to the highest performing CPU seems to be to optimize for power first, then speed, then repeat. That's because power and heat are a major design constraint that limits speed.
I first noticed this way back with the Pentium 4 "Netburst" architecture vs. the smaller x86 cores that became the ancestor of the Core architecture. Intel eventually ran into a wall with P4 and then branched high performance cores off those lower-power ones and that's what gave us the venerable Core architecture that made Intel the dominant CPU maker for over a decade.
I think the story is a bit more complicated. Core succeeded precisely because Intel had both the low-power experience with Pentium-M and the high-power experience with Netburst. The P4 architecture told them a lot about what was and wasn't viable and at what complexity. When you look at the successor generations from Core, what you see are a lot of more complex P4-like features being re-added, but with the benefits of improved microarch and fab processes. Obviously we will never know, but I don't think you would get to Haswell or Skylake in the form they were without the learning experience of the P4.
In comparison, I think Arm is actually a very strong cautionary tale that focusing on power will not get you to performance. Arm processors remained pretty poor performance until designers from other CPU families entirely (PowerPC and Intel) took it on at Apple and basically dragged Arm to the performance level they are today.
Core evolved from the Banis (Centrino) CPU core which was based on P3, not P4. Banias used the front-side bus from P4 but not the cores.
Banias was hyper optimized for power, the mantra was to get done quickly and go to sleep to save power. Somewhere along the line someone said "hey what happens if we don't go to sleep?" and Core was born.
I was really surprised by the s390x performance, but I also don't really understand why there are build time listed by architecture, not the actual processors.
What's fast on Z platforms is typically IO rather than raw CPU - the platform can push a lot of parallell data. This is typically the bottleneck when compiling.
The cores are in my experience moderately fast at most. Note that there are a lot of licencing options and I think some are speed-capped - but I don't think that applies to IFL - a standard CPU licence-restricted to only run linux.
Nothing shipping today is really competitive with modern ARM or x86. The SiFive P870 and Tenstorrent Ascalon (Jim Keller's team) are the most anticipated high-performance designs, but neither is widely available. What you can actually buy today tops out around Cortex-A76 class single-thread performance at best, which is roughly where ARM was five or six years ago.
I remember taking down some notes wrt SiFive P870 specs, comparing them to x86_64, and reaching the same conclusion. Narrower core width (4-wide vs 8-wide), lower clock frequency (peaks at 3GHz) and no turbo (?), limited support for vector execution (128-bit vs 512-bit), limited L1 bandwidth (1x 128-bit load/cycle?), limited FP compute (2x 128-bit vs 2x 512-bit), load queue is also inconveniently small with 48 entries (affecting already limited load bandwidth), unclear system memory bandwidth and how it scales wrt the number of cores (L3 contention) although for the latter they seem to use what AMD is doing (exclusive L3 cache per chiplet).
TBH I still don't really get how it's different from MIPS. As far as I can tell... Loongson seems to be really just MIPS, while LoongArch is MIPS with some extra instructions.
(purely on vibes) loongson feels to me like an intermediate step/backup strategy rather than a longterm target (though they'll probably power govt equipment for decades of legacy either way :p)
This is why felix has been building the risc-v archlinux repositories[1] using the Milk-V Pioneer.
I think the ban of SOPHGO is part to blame for the slow development.[2] They had the most performant and interesting SOCs. I had a bunch of pre-orders for the Milk-V Oasis before it was cancelled. It was supposed to come out a while ago, using the SG2380, supposedly much more performant than the Milk-V Titan mentioned in the article (which still isn't out).
It was also SOPHGO's SOCs that powered the crazy cheap/performant/versatile Milk-V DUO boards. They have the ability to switch ARM/RISC-V architecture.
I'd guess that the issue is running the `%install` and `%check` stages of the .spec file. The Python library rpy (to pull a random example from Marcin's PRs) runs rpy's pytest test suite and had to be modified to avoid running vector tests on RISC-V.
Obviously a solvable problem to split build and test but perhaps the time savings aren't worth the complexity.
Maybe the tests could be run with user-mode qemu instead of the whole thing running under qemu or on RISC-V hardware. Could possibly be more or less seamless with binfmt_misc being set up in the builders.
This. While I doubt that there will be a good (whatever that means) desktop risc-v CPU anytime soon, I do think that it will eventually catch up in embedded systems and special applications. Maybe even high core count servers.
It just takes time, people who believe in it and tons of money. Will see where the journey goes, but I am a big risc-v believer
Are you sure you are comparing apples with apples here?
The fact that i686 is 14% faster than x86_64 is a little suspicious, because usually the same software runs _faster_ on x86_64 (despite the increased memory use) thanks to a larger register set, an optimized ABI, and more vector instructions.
Of course, if you are compiling an i686 binary on i686, and an x86_64 binary on x86_64, then the compilers aren't really doing the same work, since their output is different. I'm not a compiler expert, but I could imagine that compiling x86_64 binaries is intrinsically slower than for i686 for a variety of reasons. For example, x86_64 is mostly a superset of i686, so a compiler has way more instructions to consider, including potential optimizations using e.g. SIMD instructions that don't exist on i686 at all. Or a compiler might assume a larger instruction cache size, by default, and do more unrolling or inlining when compiling for x86_64. And so on.
In that case, compiling on x86_64 is slower not because the hardware is bad but because the compiler does more work. Perhaps something similar is happening on RISC-V.
OK, I'll bite. If this is a truly competitive core - I don't claim enough personal expertise to judge - does anyone fab and sell it? There should be a business case if it is.
i. llvm presentation can thrash caches if setup wrong (given the plethora of RISC-V fragmented versions, most compilers won't cover every vanity silicon.)
ii. gcc is also "slow" in general, but is predictable/reliable
iii. emulation is always slower than kvm in qemu
It may seem silly, but I'd try a gcc build with -O0 flag, and a toy unit test with -S to see if the ASM is actually foobar. One may have to force the -mtune=boom flag to narrow your search. Best regards =3
If the builds are slow, build accelerators can help a lot. Ccache would work for sure and there is also firebuild, that can accelerate the linker phase and many other tools in builds.
Don't blame the ISA - blame the silicon implementations AND the software with no architecture-specific optimisations.
RISC-V will get there, eventually.
I remember that ARM started as a speed demon with conscious power consumption, then was surpassed by x86s and PPCs on desktops and moved to embedded, where it shone by being very frugal with power, only to now be leaving the embedded space with implementations optimised for speed more than power.
In some cases RISC-V ISA spec is definitely the one to blame:
1) https://github.com/llvm/llvm-project/issues/150263
2) https://github.com/llvm/llvm-project/issues/141488
Another example is hard-coded 4 KiB page size which effectively kneecaps ISA when compared against ARM.
Also the bit manipulation extension wasn't part of the core. So things like bit rotation is slow for no good reason, if you want portable code. Why? Who knows.
> Also the bit manipulation extension wasn't part of the core.
This is primarily because core is primarily a teaching ISA. One of the best parts about RiscV is that you can teach a freshman level architecture class or a senior level chip building project with an ISA that is actually used. Anything powerful to run (a non built from source manually) linux will support a profile that bundles all the commonly needed instructions to be fast.
Bit manipulation instructions are part and parcel of any curriculum that teaches CPU architecture. They are the basic building blocks for many more complex instructions.
https://five-embeddev.com/riscv-bitmanip/1.0.0/bitmanip.html
I can see quite a few items on that list that imnsho should have been included in the core and for the life of me I can't see the rationale behind leaving them out. Even the most basic 8 bit CPU had various shifts and rolls baked in.
32-bit barrel shifters consume significant area and RISC-V was developed to support resource constrained low cost embedded hardware in a minimal ISA implementation.
This is the reason behind the profiles like RVA23 which include bitmanip, vector and a large number of other extensions. Real chips coming very soon will all be RVA23.
Neat. I can't wait to get my hands on a devboard.
> One of the best parts about RiscV is that you can teach a freshman level architecture class or a senior level chip building project with an ISA that is actually used.
Same could be said of MIPS.
My understanding is the RISC-V raison d'etre is rather avoidance of patented/copywritten designs.
the avoidance of patent/copyright is critical for (legally) having students design their own chips. MIPS was pretty good (and widely used) for teaching assembly, but pretty bad for teaching a class where students design chips
The fact the Hazard3 designer ended up creating an extension to resolve related oddities was kind of astonishing.
Why did it fall to them to do it? Impressive that he did, but it shouldn't have been necessary.
Which extension is that?
An extension he calls Xh3bextm. For extracting multiple bits from bitfields.
https://wren.wtf/hazard3/doc/#extension-xh3bextm-section
There are also four other custom extensions implemented.
> RISC-V will get there, eventually.
Not trolling: I legitimately don't see why this is assumed to be true. It is one of those things that is true only once it has been achieved. Otherwise we would be able to create super high performance Sparc or SuperH processors, and we don't.
As you note, Arm once was fast, then slow, then fast. RISC-V has never actually been fast. It has enabled surprisingly good implementations by small numbers of people, but competing at the high end (mobile, desktop or server) it is not.
RISC-V doesn't have the pitfalls of Sparc (register windows, branch delay slots), largely because we learned from that. It's in fact a very "boring" architecture. There's no one that expects it'll be hard to optimize for. There are at least 2 designs that have taped out in small runs and have high end performance.
RISC-V does not have the pitfalls of experimental ISAs from 45 years ago, but it has other pitfalls that have not existed in almost any ISA since the first vacuum-tube computers, like the lack of means for integer overflow detection and the lack of indexed addressing.
Especially the lack of integer overflow detection is a choice of great stupidity, for which there exists no excuse.
Detecting integer overflow in hardware is extremely cheap, its cost is absolutely negligible. On the other hand, detecting integer overflow in software is extremely expensive, increasing both the program size and the execution time considerably, because each arithmetic operation must be replaced by multiple operations.
Because of the unacceptable cost, normal RISC-V programs choose to ignore the risk of overflows, which makes them unreliable.
The highest performance implementations of RISC-V from previous years were forced to introduce custom extensions for indexed addressing, but those used inefficient encodings, because something like indexed addressing must be in the base ISA, not in an extension.
> On the other hand, detecting integer overflow in software is extremely expensive
this just isn't true. both addition and multiplication can check for overflow in <2 instructions.
> On the other hand, detecting integer overflow in software is extremely expensive, increasing both the program size and the execution time considerably,
Most languages don't care about integer overflow. Your typical C program will happily wrap around.
If I really want to detect overflow, I can do this:
Which is one more instruction, which is not great, not terrible.I have no idea or practical experience with anything this low-level, so idk how much following matters, it's just someone from the crowd offering unvarnished impressions:
It's easy to believe you're replying to something that has an element of hyperbole.
It's hard to believe "just do 2x as many instructions" and "ehhh who cares [i.e. your typical C program doesn't check for overflow]", coupled to a seemingly self-conscious repetition of a quip from the television series Chernobyl that is meant to reference sticking your head in the sand, retire the issue from discussion.
As a counterexample, I point to another relatively boring RISC, PA-RISC. It took off not (just) because the architecture was straightforward, but because HP poured cash into making it quick, and PA-RISC continued to be a very competitive architecture until the mass insanity of Itanic arrived. I don't see RISC-V vendors making that level of investment, either because they won't (selling to cheap markets) or can't (no capacity or funding), and a cynical take would say they hide them behind NDAs so no one can look behind the curtain.
I know this is a very negative take. I don't try to hide my pro-Power ISA bias, but that doesn't mean I wouldn't like another choice. So far, however, I've been repeatedly disappointed by RISC-V. It's always "five or six years" from getting there.
> RISC-V doesn't have the pitfalls of Sparc (register windows, branch delay slots),
You're saying ISA design does have implementation performance implications then? ;)
> There's no one that expects it'll be hard to optimize for
[Raises hand]
> There are at least 2 designs that have taped out in small runs and have high end performance.
Are these public?
Edit: I should add, I'm well aware of the cultural mismatch between HN and the semi industry, and have been caught in it more than a few times, but I also know the semi industry well enough to not trust anything they say. (Everything from well meaning but optimistic through to outright malicious depending on the company).
The 2 designs I'm thinking of are (tiresomely) under NDA, although I'm sure others will be able to say what they are. Last November I had a sample of one of them in my hand and played with the silicon at their labs, running a bunch of AI workloads. They didn't let me take notes or photographs.
> There's no one that expects it'll be hard to optimize for
No one who is an expert in the field, and we (at Red Hat) talk to them routinely.
I don't think anybody suggests Oracle couldn't make faster SPARC processors, it's just that development of SPARC ended almost 10 years ago. At the time SPARC was abandoned, it was very competitive.
Marcin is working with us on RISC-V enablement for Fedora and RHEL, he's well aware of the problem with current implementations. We're hopeful that this'll be pretty much resolved by the end of the year.
There's the ARM video from LowSpecGamer, where they talk about how they forgot to connect power to the chip, and it was still executing code anyway. According to Steve Furber, the chip was accidentally being powered from the protection diodes alone. So ARM was incredibly power efficient from the very beginning.
> AND the software with no architecture-specific optimisations
The optimizations that'd be applied to ARM and MIPS would be equally applicable to RISC-V. I do not believe this is a lack of software optimization issue.
We are well past the days where hand written assembly gives much benefit, and modern compilers like gcc and llvm do nearly identical work right up until it comes to instruction emissions (including determining where SIMD instructions could be placed).
Unless these chips have very very weird performance characteristics (like the weirdness around x86's lea instruction being used for arithmetic) there's just not going to be a lot of missed heuristics.
> The optimizations that'd be applied to ARM and MIPS would be equally applicable to RISC-V.
There's no carry bit, and no widening multiply(or MAC)
One thing compilers still struggle with is exploiting weird microarchitectural quirks or timing behaviors that aren't obvious from the ISA spec, especially with memory, cache and pipeline tuning. If a new RISC-V core doesn't expose the same prefetching tricks or has odd branch prediction you won't get parity just by porting the same backend. If you want peak numbers sometimes you do still need to tune libraries or even sprinkle in a bit of inline asm despite all the "let the compiler handle it" dogma.
While true, it's typically not going to be impactful on system performance.
There's a reason, for example, why the linux distros all target a generic x86 architecture rather than a specific architecture.
Not all. CachyOS has specific builds for v3, v4, and AMD Zen4/5: https://wiki.cachyos.org/features/optimized_repos/
Some applications may target a generic x86 architecture without any impact on performance.
However, other applications which must do cryptographic operations, audio/video processing, scientific/technical/engineering computing, etc. may have wildly different performances when compiled for different x86-64 ISA versions, for which dedicated assembly-language functions exist.
> Don't blame the ISA - blame the silicon implementations
That's true, but tautological.
The issue is that the RISC-V core is the easy part of the problem, and nobody seems to even be able to generate a chip that gets that right without weirdness and quirks.
The more fundamental technical problem is that things like the cache organization and DDR interface and PCI interface and ... cannot just be synthesized. They require analog/RF VLSI designers doing things like clock forwarding and signal integrity analysis. If you get them wrong, your performance tanks, and, so far, everybody has gotten them wrong in various ways.
The business problem is the fact that everybody wants to be the "performance" RISC-V vendor, but nobody wants to be the "embedded" RISC-V vendor. This is a problem because practically anybody who is willing to cough up for a "performance" processor is almost completely insensitive to any cost premium that ARM demands. The embedded space is hugely sensitive to cost, but nobody is willing to step into it because that requires that you do icky ecosystem things like marketing, software, debugging tools, inventory distribution, etc.
This leads to the US business problem which is the fact that everybody wants to be an IP vendor and nobody wants to ship a damn chip. Consequently, if I want actual RISC-V hardware, I'm stuck dealing with Chinese vendors of various levels of dodginess.
A pattern I've noticed for a very long time:
A lot of times the path to the highest performing CPU seems to be to optimize for power first, then speed, then repeat. That's because power and heat are a major design constraint that limits speed.
I first noticed this way back with the Pentium 4 "Netburst" architecture vs. the smaller x86 cores that became the ancestor of the Core architecture. Intel eventually ran into a wall with P4 and then branched high performance cores off those lower-power ones and that's what gave us the venerable Core architecture that made Intel the dominant CPU maker for over a decade.
ARM's history is another example.
I think the story is a bit more complicated. Core succeeded precisely because Intel had both the low-power experience with Pentium-M and the high-power experience with Netburst. The P4 architecture told them a lot about what was and wasn't viable and at what complexity. When you look at the successor generations from Core, what you see are a lot of more complex P4-like features being re-added, but with the benefits of improved microarch and fab processes. Obviously we will never know, but I don't think you would get to Haswell or Skylake in the form they were without the learning experience of the P4.
In comparison, I think Arm is actually a very strong cautionary tale that focusing on power will not get you to performance. Arm processors remained pretty poor performance until designers from other CPU families entirely (PowerPC and Intel) took it on at Apple and basically dragged Arm to the performance level they are today.
I don’t have a micro architecture background so I apologize if this is obvious — What do power and speed mean in this context?
Power - how many Watts does it need? Speed - how quickly can it perform operations?
You can get low power with a simple design at a low clock. This definitely will not help achieve high performance later.
One could say "Optimize for efficiency first, then performance".
Core evolved from the Banis (Centrino) CPU core which was based on P3, not P4. Banias used the front-side bus from P4 but not the cores.
Banias was hyper optimized for power, the mantra was to get done quickly and go to sleep to save power. Somewhere along the line someone said "hey what happens if we don't go to sleep?" and Core was born.
Parallels to code design, where optimizing data or code size can end up having fantastic performance benefits (sometimes).
IF you care to read the article, they indeed do not blame the architecture but the available silicon implementations.
I did read it. A Banana Pi is not the fastest developer platform. The title is misleading.
BTW, it's quite impressive how the s390x is so fast per core compared to the others. I mean, of course it's fast - we all knew that.
And don't let IBM legal see this can be considered a published benchmark, because they are very shy about s390x performance numbers.
I was really surprised by the s390x performance, but I also don't really understand why there are build time listed by architecture, not the actual processors.
What's fast on Z platforms is typically IO rather than raw CPU - the platform can push a lot of parallell data. This is typically the bottleneck when compiling.
The cores are in my experience moderately fast at most. Note that there are a lot of licencing options and I think some are speed-capped - but I don't think that applies to IFL - a standard CPU licence-restricted to only run linux.
Probably because that's just the infrastructure they have.
i686 builds even faster
> A Banana Pi is not the fastest developer platform.
What is the current fastest platform that isn’t exorbitantly expensive? Not upcoming releases, but something I can actually buy.
I check in every 3-6 months but the situation hasn’t changed significantly yet.
What is the current fastest ppc64le implementation that isn’t exorbitantly expensive? How about the s390x?
Which risc-v implementation is considered fast?
Nothing shipping today is really competitive with modern ARM or x86. The SiFive P870 and Tenstorrent Ascalon (Jim Keller's team) are the most anticipated high-performance designs, but neither is widely available. What you can actually buy today tops out around Cortex-A76 class single-thread performance at best, which is roughly where ARM was five or six years ago.
I remember taking down some notes wrt SiFive P870 specs, comparing them to x86_64, and reaching the same conclusion. Narrower core width (4-wide vs 8-wide), lower clock frequency (peaks at 3GHz) and no turbo (?), limited support for vector execution (128-bit vs 512-bit), limited L1 bandwidth (1x 128-bit load/cycle?), limited FP compute (2x 128-bit vs 2x 512-bit), load queue is also inconveniently small with 48 entries (affecting already limited load bandwidth), unclear system memory bandwidth and how it scales wrt the number of cores (L3 contention) although for the latter they seem to use what AMD is doing (exclusive L3 cache per chiplet).
DC-ROMA 2 is on the Rasperry 4 level of performance last I heard
I keep checking in on Tenstorrent every few months thinking Keller is going to rock our world... losing hope.
At this point the most likely place for truly competitive RISC-V to appear is China.
> At this point the most likely place for fast RISC-V to appear is China.
Or we just adopt Loongson.
TBH I still don't really get how it's different from MIPS. As far as I can tell... Loongson seems to be really just MIPS, while LoongArch is MIPS with some extra instructions.
LoongArch is, on a first approximation, an almost RISC-V user space instruction set together with MIPS-like privileged instructions and registers.
They did get rid of the delay slots and some other MIPS oddities
But legally distinct! I guess calling it Ｍ○ＰＳ was not enough for plausible deniability.
ISAs shouldn't be patentable in the first place.
(purely on vibes) loongson feels to me like an intermediate step/backup strategy rather than a longterm target (though they'll probably power govt equipment for decades of legacy either way :p)
Then how do you justify the title?
But they didn't reflect that in a title like "current RISC-V silicon Is Sloooow" ...
This is why felix has been building the risc-v archlinux repositories[1] using the Milk-V Pioneer.
I think the ban of SOPHGO is part to blame for the slow development.[2] They had the most performant and interesting SOCs. I had a bunch of pre-orders for the Milk-V Oasis before it was cancelled. It was supposed to come out a while ago, using the SG2380, supposedly much more performant than the Milk-V Titan mentioned in the article (which still isn't out).
It was also SOPHGO's SOCs that powered the crazy cheap/performant/versatile Milk-V DUO boards. They have the ability to switch ARM/RISC-V architecture.
[1]: https://archriscv.felixc.at/
[2]: https://www.tomshardware.com/tech-industry/artificial-intell...
Or they could fix cross compilation and then compile it on a normal x86_64 server
Is cross compilation out of the question?
I'd guess that the issue is running the `%install` and `%check` stages of the .spec file. The Python library rpy (to pull a random example from Marcin's PRs) runs rpy's pytest test suite and had to be modified to avoid running vector tests on RISC-V.
Obviously a solvable problem to split build and test but perhaps the time savings aren't worth the complexity.
https://src.fedoraproject.org/rpms/rpy/pull-request/4#reques...
Maybe the tests could be run with user-mode qemu instead of the whole thing running under qemu or on RISC-V hardware. Could possibly be more or less seamless with binfmt_misc being set up in the builders.
It's usually an enormous pain to set up. QEMU is probably the best option.
Maybe there are issues I'm not aware of but using dockcross has made cross-compilation quite easy in my experience.
https://github.com/dockcross/dockcross
T2 manages to do it
https://t2linux.com/
Depends on the language, it's pretty trivial with Go.
Unless you use CGO. I've heard people using Zig (which has great cross compilation for the Zig language as well) to cross compile C with CGO though.
Yes, but they're compiling binutils.
Couldn’t be caused by a slower compiler? Fe. What would be a difference when cross compiling same code to aarch64 vs risc-v?
There's zero mention of hardware specs or cost beyond architecture and core counts... What is the purpose of this post?
Anyway, it's hardly surprising that a young ISA with not a 1/1000th of the investment of x86 or ARM has slower chips than them x)
Yeah it's a few years behind ARM, but not that many. Imagine trying to compile this on ARM 10 years ago. It would be similarly painful.
> Imagine trying to compile this on ARM 10 years ago
Cortex A57 is 14 years old and is significantly faster than the 9 year old Cortex A55 these RISC-V cores are being compared against.
So yes it's many years behind. Many, many years.
This. While I doubt that there will be a good (whatever that means) desktop risc-v CPU anytime soon, I do think that it will eventually catch up in embedded systems and special applications. Maybe even high core count servers.
It just takes time, people who believe in it and tons of money. Will see where the journey goes, but I am a big risc-v believer
Are you sure you are comparing apples with apples here?
The fact that i686 is 14% faster than x86_64 is a little suspicious, because usually the same software runs _faster_ on x86_64 (despite the increased memory use) thanks to a larger register set, an optimized ABI, and more vector instructions.
Of course, if you are compiling an i686 binary on i686, and an x86_64 binary on x86_64, then the compilers aren't really doing the same work, since their output is different. I'm not a compiler expert, but I could imagine that compiling x86_64 binaries is intrinsically slower than for i686 for a variety of reasons. For example, x86_64 is mostly a superset of i686, so a compiler has way more instructions to consider, including potential optimizations using e.g. SIMD instructions that don't exist on i686 at all. Or a compiler might assume a larger instruction cache size, by default, and do more unrolling or inlining when compiling for x86_64. And so on.
In that case, compiling on x86_64 is slower not because the hardware is bad but because the compiler does more work. Perhaps something similar is happening on RISC-V.
The x86-64 build runs about 50% more linker tests than the i686 build.
there are projects for making high performance RISC-V chips like this one https://github.com/OpenXiangShan/XiangShan
OK, I'll bite. If this is a truly competitive core - I don't claim enough personal expertise to judge - does anyone fab and sell it? There should be a business case if it is.
Why is it slow? I thought we have Rivos chips
Rivos was acquired by Meta last year.
Any new hardware lags in compiler optimizations.
i. llvm presentation can thrash caches if setup wrong (given the plethora of RISC-V fragmented versions, most compilers won't cover every vanity silicon.)
ii. gcc is also "slow" in general, but is predictable/reliable
iii. emulation is always slower than kvm in qemu
It may seem silly, but I'd try a gcc build with -O0 flag, and a toy unit test with -S to see if the ASM is actually foobar. One may have to force the -mtune=boom flag to narrow your search. Best regards =3
If the builds are slow, build accelerators can help a lot. Ccache would work for sure and there is also firebuild, that can accelerate the linker phase and many other tools in builds.