I always applaud homebrew cpu designs but after doing so many myself I would reaaaaly advice to stay away from dip chips/breadboards/wirewraps and any attempts to put it into real physical world. Taking a build out of a logisim/verilog to real world in chips sucks away all the fun about cpu design - suddenly you have to deal with invisible issues like timing, glitchy half-dead chip, bad wire connection, etc. these are not challenges, just mundane dull work.
The only exception to „stay in the sim“ rule is if you want to make an „art statement“, i.e. like BMOW (or my relay cpu https://github.com/artemonster/relay-cpu/blob/main/images/fr... /shamelessplug)
My advice would be to consider the possibility, not necessarily to stay out of the physical world. For some, those physical details may be the fun part. Some hate verilog. Some want to put it on an FPGA, some don't. I, personally, moved away from FPGAs due to bad documentation (looking at you, Lattice).
An alternative to Verilog is RTl simulation in a higher-level Language, or even higher-level Simulation.
Just remember that you can't define what is "fun".
I'm totally with you personally, but sometimes doing the actually hard part is fun. Type 2 fun.
Long ago I took a CPU architecture class and we implemented designs in Verilog as a final project. Apparently people who took the class in the late 90s (before my time) could actually tape-out their designs and pay a few hundred dollars to get fabbed chips as part of a multiproject wafer. I was always curious if those chips actually worked, or just looked pretty.
I always applaud homebrew cpu designs but after doing so many myself I would reaaaaly advice to stay away from dip chips/breadboards/wirewraps and any attempts to put it into real physical world. Taking a build out of a logisim/verilog to real world in chips sucks away all the fun about cpu design - suddenly you have to deal with invisible issues like timing, glitchy half-dead chip, bad wire connection, etc. these are not challenges, just mundane dull work. The only exception to „stay in the sim“ rule is if you want to make an „art statement“, i.e. like BMOW (or my relay cpu https://github.com/artemonster/relay-cpu/blob/main/images/fr... /shamelessplug)
My advice would be to consider the possibility, not necessarily to stay out of the physical world. For some, those physical details may be the fun part. Some hate verilog. Some want to put it on an FPGA, some don't. I, personally, moved away from FPGAs due to bad documentation (looking at you, Lattice).
An alternative to Verilog is RTl simulation in a higher-level Language, or even higher-level Simulation.
Just remember that you can't define what is "fun".
I'm totally with you personally, but sometimes doing the actually hard part is fun. Type 2 fun.
Long ago I took a CPU architecture class and we implemented designs in Verilog as a final project. Apparently people who took the class in the late 90s (before my time) could actually tape-out their designs and pay a few hundred dollars to get fabbed chips as part of a multiproject wafer. I was always curious if those chips actually worked, or just looked pretty.