I had similar feelings but the comments below about adding an SDR to it with an M.2 slot got me looking a little closer. This has an 8-core Rockchip A72/A53 processor and 8GB of RAM. This is not an incremental improvement over the Flipper Zero, this is something else entirely. Hmmmmm...
I had plenty of fun reverse engineering a 433.92 MHz protocol curtain motors at my house use. Once that was done and I taught first my Flipper Zero, then a RPi with a C1101 to actuate the motors, the Flipper is sitting idly in the drawer.
I have done exactly the same type and amount of stuff with my flipper zero, probably in the target demo. still, no complaints! I think the one is a cool toy that I will one day (if I’m lucky) use as the perfect solution for a problem. If I can do that just once, it’ll be worth the price for me.
maybe I'm blind, but it looks like there's no radio! like there's wifi and bluetooth, sure, but I don't see NFC or RFID or sub-1ghz radio, at all.
imo the flipper always needed to be a software-defined transciever, with a small FPGA to drive it, like the other SDRs on the market. I'm disappointed they seem to have forsaken radio completely.
The flipper zero was already in a grey area because it easily enables one to do things in licensed bands and do things you’re not allowed to do in unlicensed bands. They can’t plausibly add even more functions in this area and still sell to the public. Presumably all of the interfaces they added are for users to add the functions under their own responsibility.
I've heard some professionally inclined RFID engineers dismiss these as mere toys and not useful compared to professional grade hardware. Perhaps some of those folk are on HN if so what are the tool sets you actually use that can be sold to the public?
RF design is very much an art, and the difference between works and works really well without harmonics and noise is a matter of design subtleties and often expensive parts. There are decent SDR setups around $500-700 that are known to be pretty good, but you have to go out of your way to buy them from the actual design houses, because despite being “identical”, the clones are not the same. In RF, the devil is in the details.
That's pretty simple - the chosen display is best for core usage. Cleay visible in bright sun or dark, sharp angles, easy on the battery. For anything else, there's a HDMI out isn't there.
I have a Flipper Zero and I've used it... occasionally. Like that one time controlling the Taylor Swift Eras tour wristbands: https://blog.jgc.org/2024/05/controlling-taylor-swift-eras-t... but it's mostly sat around being an odd device.
I duplicated a couple of RFID things, used the IR for some stuff, and once in a while used the radio receiver, but mostly it looks pretty.
I'm not sure what I'd do with a Flipper One, but I guess I've done a lot of things with Raspberry Pis so... maybe?
I had similar feelings but the comments below about adding an SDR to it with an M.2 slot got me looking a little closer. This has an 8-core Rockchip A72/A53 processor and 8GB of RAM. This is not an incremental improvement over the Flipper Zero, this is something else entirely. Hmmmmm...
I plan on using it to create a backup password/2FA device... eventually
I had plenty of fun reverse engineering a 433.92 MHz protocol curtain motors at my house use. Once that was done and I taught first my Flipper Zero, then a RPi with a C1101 to actuate the motors, the Flipper is sitting idly in the drawer.
Heh... I used Flipper Zero to clone RFID tags for all the neighbors to T5577 rings, pins, sticky pads and whatever not for our gated community.
If you are adventurous, many ski stations have low-tech cards as well, although they also tend to have human controllers once in a while.
And, finally, kids like running around with Flipper Zero opening power taps on Teslas.
I have done exactly the same type and amount of stuff with my flipper zero, probably in the target demo. still, no complaints! I think the one is a cool toy that I will one day (if I’m lucky) use as the perfect solution for a problem. If I can do that just once, it’ll be worth the price for me.
maybe I'm blind, but it looks like there's no radio! like there's wifi and bluetooth, sure, but I don't see NFC or RFID or sub-1ghz radio, at all.
imo the flipper always needed to be a software-defined transciever, with a small FPGA to drive it, like the other SDRs on the market. I'm disappointed they seem to have forsaken radio completely.
The flipper zero was already in a grey area because it easily enables one to do things in licensed bands and do things you’re not allowed to do in unlicensed bands. They can’t plausibly add even more functions in this area and still sell to the public. Presumably all of the interfaces they added are for users to add the functions under their own responsibility.
They added an M.2 port [1] to which you can attach a variety of modules, including SDR (eg. [2] 30 MHz - 11 GHz).
[1]: https://docs.flipper.net/one/hardware/m2-port/modules [2]: https://www.crowdsupply.com/wavelet-lab/ssdr
A Swiss army knife of the day - after all, Swiss Army knives also serve a psychological purpose. And they do it well!
Why the AI voice assistant? What? Is this perhaps a prank? That doesn't line up with the ethos of the Flipper Zero
[delayed]
I've heard some professionally inclined RFID engineers dismiss these as mere toys and not useful compared to professional grade hardware. Perhaps some of those folk are on HN if so what are the tool sets you actually use that can be sold to the public?
RF design is very much an art, and the difference between works and works really well without harmonics and noise is a matter of design subtleties and often expensive parts. There are decent SDR setups around $500-700 that are known to be pretty good, but you have to go out of your way to buy them from the actual design houses, because despite being “identical”, the clones are not the same. In RF, the devil is in the details.
Not too far from the truth. The Flipper is good as a toy, but for serious RFID things you want a proxmark 3 clone with Iceman firmware ;)
Side question: anyone know what they are using to make those 3d schemas with highlights?
Finally a legit prop for movies not a pcb taped to a TV remote
I like that subreddit too with the e-ink display wifi probing thing forget what it's called oh pwnagotchi
Looks both expensive and power hungry, will be interesting to see how that works out
Why put such crappy display on such a high power device?
That's pretty simple - the chosen display is best for core usage. Cleay visible in bright sun or dark, sharp angles, easy on the battery. For anything else, there's a HDMI out isn't there.