> our entirely in-house game engine PasVulkan, which powers SEEDS, as well as our RISC-V emulator PasRISCV, are both Free and Open Source Software (FOSS)
A few things about our RISC-V 64-bit emulator. Please forgive me, if I make some mistakes, but I'm not the expert on this.
First, PasRISCV not only emulates userspace (RV64GC usermode), but a complete, modern machine (SMP/MultiHART, RV64, full RVA23.1 including Hypervisor, Crypto, Vector stuff, etc.), which is capable of booting a normal Linux kernel (either using direct OpenSBI -> kernel boot, but currently everything has to be in the initrd then), or using U-Boot (OpenSBI -> U-Boot -> kernel).
The emulator uses a hybrid of interpreter with a tracing JIT. Currently, the JIT is limited to host x86-64. About 99% of all instructions and are supported by the JIT. For example, the host FPU is passed through to the guest. But PasRISCV also supports an optional stricter FPU mode, where with soft floats and interpreter only, because IEEE754-2008 has specific rules, that don't exist on the x86 architecture.
Disk images are provided either using VirtIO-Block or NVMe via PCIe. We can either use disks in normal read-write mode, or also in read-only mode. This allows us to have a root partition, that we can overwrite with game updates, and have a user partition, where custom player stuff is stored. We also can mount host dirs as external paths/mounts over VirtIO-9P or VirtIO-FS, which is especially useful for development because this allows us to compile guest tools directly on the host system.
To display graphics on our virtual game screen(s), we currently use a framebuffer device (via SimpleFB with a custom MMIO framebuffer). But PasRISCV also supports other graphics "adapters", such as VirtIO GPU (with EDID, 2D, and experimental 3D/virgl support), or using PCI emulation (bochs-drm and Cirrus-DRM). We have some custom shaders modifying the framebuffer output, so that we can add some retro FX like scanlines, phosphor glow, etc.
The emulator also has audio using emulated CMI8738 and FM801 cards (both with OPL2/3 support), as well as Intel HDA and VirtIO-Sound. Our little space game (Space Prowler) inside SEEDS has a title tune which is made using PCM+OPL3. I coded a small tracker, which runs in a plain Linux console, so I can even compose inside our game on its 80×50 (640×400px) framebuffer console, albeit it's a bit cumbersome. I'll release the tracker as FOSS when we have a bit more spare time, as I need to make it a bit more user-friendly.
We use vsock (Linux virtual sockets) to interface with the game outside of the emulated machine. We use a small serialization format (basically something similar to binary JSON) to communicate bi-directionally, like you'd expect over normal network. We have a small priority queue and message referencing for urgent and request-response communication. For example, the client to display a planet sphere on the in-game computer can ask for updated positions of e.g. terrain or all animals.
The emulator embeds its own disassembler and debugger, and also can act as gdb server, which means you can use your favourite debugging tools, as long as it speaks gdb's server protocol.
It has real network support through a Slirp-like usermode NAT (without using external libs) which supports IPv4 and IPv6. We can run APK's update and install directly on the emulated machine.
Our game uses a slightly modified Alpine Linux 3.23 and custom kernel build, but a recent stock Alpine image also runs without problems.
PasRISCV is licensed under the permissive zlib license.
If you have any questions, I'm sure BeRo is happy to answer questions with far more detail than I could. :)
Do you have a blog post about this? The link is to the home page and doesn't mention anything! Sounds super interesting but the landing page reads like survivalcraft in space #1001
Hey, thanks for asking! If you scroll to the bottom on the homepage, there's a bit of info, and we also have some information on the Steam page of the game.
We plan to do a series of blog posts with technical information about the game and its internals, but right now, we're busy preparing for an Early Access release.
Cool, and quite reminiscent of 0x10c: https://en.wikipedia.org/wiki/0x10c
I saw this on the steam page:
> our entirely in-house game engine PasVulkan, which powers SEEDS, as well as our RISC-V emulator PasRISCV, are both Free and Open Source Software (FOSS)
Can you link to PasVulkan and PasRISCV please?
PasRISCV: https://github.com/BeRo1985/pasriscv
pasriscvemu: https://github.com/BeRo1985/pasriscvemu
PasVulkan: https://github.com/BeRo1985/pasvulkan
POCA https://github.com/BeRo1985/poca
BeRo of farbrausch is 1/3 of our team. :)
(edit) added a link to POCA, the scripting language, as it's relevant, too
I had the honor of briefly being in the same demogroup as BeRo long ago, and he's absolutely one of the most incredible developers I ever met!
I added a little information about PasRISCV here:
https://news.ycombinator.com/item?id=49939720
A few things about our RISC-V 64-bit emulator. Please forgive me, if I make some mistakes, but I'm not the expert on this.
First, PasRISCV not only emulates userspace (RV64GC usermode), but a complete, modern machine (SMP/MultiHART, RV64, full RVA23.1 including Hypervisor, Crypto, Vector stuff, etc.), which is capable of booting a normal Linux kernel (either using direct OpenSBI -> kernel boot, but currently everything has to be in the initrd then), or using U-Boot (OpenSBI -> U-Boot -> kernel).
The emulator uses a hybrid of interpreter with a tracing JIT. Currently, the JIT is limited to host x86-64. About 99% of all instructions and are supported by the JIT. For example, the host FPU is passed through to the guest. But PasRISCV also supports an optional stricter FPU mode, where with soft floats and interpreter only, because IEEE754-2008 has specific rules, that don't exist on the x86 architecture.
Disk images are provided either using VirtIO-Block or NVMe via PCIe. We can either use disks in normal read-write mode, or also in read-only mode. This allows us to have a root partition, that we can overwrite with game updates, and have a user partition, where custom player stuff is stored. We also can mount host dirs as external paths/mounts over VirtIO-9P or VirtIO-FS, which is especially useful for development because this allows us to compile guest tools directly on the host system.
To display graphics on our virtual game screen(s), we currently use a framebuffer device (via SimpleFB with a custom MMIO framebuffer). But PasRISCV also supports other graphics "adapters", such as VirtIO GPU (with EDID, 2D, and experimental 3D/virgl support), or using PCI emulation (bochs-drm and Cirrus-DRM). We have some custom shaders modifying the framebuffer output, so that we can add some retro FX like scanlines, phosphor glow, etc.
The emulator also has audio using emulated CMI8738 and FM801 cards (both with OPL2/3 support), as well as Intel HDA and VirtIO-Sound. Our little space game (Space Prowler) inside SEEDS has a title tune which is made using PCM+OPL3. I coded a small tracker, which runs in a plain Linux console, so I can even compose inside our game on its 80×50 (640×400px) framebuffer console, albeit it's a bit cumbersome. I'll release the tracker as FOSS when we have a bit more spare time, as I need to make it a bit more user-friendly.
We use vsock (Linux virtual sockets) to interface with the game outside of the emulated machine. We use a small serialization format (basically something similar to binary JSON) to communicate bi-directionally, like you'd expect over normal network. We have a small priority queue and message referencing for urgent and request-response communication. For example, the client to display a planet sphere on the in-game computer can ask for updated positions of e.g. terrain or all animals.
The emulator embeds its own disassembler and debugger, and also can act as gdb server, which means you can use your favourite debugging tools, as long as it speaks gdb's server protocol.
It has real network support through a Slirp-like usermode NAT (without using external libs) which supports IPv4 and IPv6. We can run APK's update and install directly on the emulated machine.
Our game uses a slightly modified Alpine Linux 3.23 and custom kernel build, but a recent stock Alpine image also runs without problems.
PasRISCV is licensed under the permissive zlib license.
If you have any questions, I'm sure BeRo is happy to answer questions with far more detail than I could. :)
Do you have a blog post about this? The link is to the home page and doesn't mention anything! Sounds super interesting but the landing page reads like survivalcraft in space #1001
Hey, thanks for asking! If you scroll to the bottom on the homepage, there's a bit of info, and we also have some information on the Steam page of the game.
We plan to do a series of blog posts with technical information about the game and its internals, but right now, we're busy preparing for an Early Access release.
https://store.steampowered.com/app/5186640/SEEDS__Echoes_Ben...
I added a little information about PasRISCV here:
https://news.ycombinator.com/item?id=49939720
I took the time and wrote a proper blog post describing our RISC-V emulator and a few other things at a high level:
https://againstallodds.games/blog/2026/10/03/our-risc-v-emul...
(We've switched the URL to that from https://againstallodds.games/ by submitter's request.)